Title Browse
*>*
Proceeding：
Abstract Book of 23rd International Congress of Theoretical and Applied Mechanics

- Date of Publication:
- 2012-08-19

- Conference:
- 23rd International Congress of Theoretical and Applied Mechanics

- Conference Date:
- 2012-08-19

- Editorial Board:
- Yilong Bai、Jianxiang Wang、Daining Fang

- Articles:
- 1431

- Downloads:
- 7193

- Hosts:
- The International Union of Theoretical and Applied Mechanics(IUTAM)、The Chinese Society of Theoretical and Applied Mechanics(CSTAM)

- Optimization of Prager structures by finite element method
- Impulsive synchronization motion in networked multibody systems
- Optimal control of vibrationally excited locomotion systems
- Adaptive finite element material point method and its applications in impact simulation
- Stochastic model updating based on an efficient novel method
- Numerical approaches to large-scale geological modeling
- Weighting function selection problem in the Galerkin method
- Application of GJ-integral to shape optimization problems for partial differential equations/system with mixed boundary conditions
- FMBEM acoustic shape sensitivity analysis and its application to shape optimization of noise barriers
- Noise sensitivity of balance with delayed on-off control
- Optimal bounded control of the randomly excited nonlinear oscillators containing fractional derivative damping
- Approximations of nonlinear differential equation solutions
- Probability density evolution analysis of multidimensional nonlinear stochastic dynamical systems
- Some researches for the delayed feedback control of flexible structures
- Disentangling multi-level systems:averaging,correlations,memory
- A separation variable quadrature element method for thickness-shear vibrations of rectangular crystal plates
- An enriched finite element for bimaterial interfacial cracks
- Development of convolution quadrature boundary element method for 2D poroelastic wave propagation
- Symplectic time-subdomain iterative method for nonlinear dynamic equation
- Convolution quadrature boundary element method for 3D elastodynamic analysis of general anisotropic elastic solids
- Geometric interpretation of discretized symmetric-conservative metric for higher-order finite-difference scheme
- Equations for convection in binary mixture:symmetry analysis and exact solutions
- Contact stiffness of bodies with fractal roughness:comparison of 3D BEM results and reduction method
- Mathematical modelling of aortic dissection
- Singular boundary method for radiation and wave scattering:numerical aspects and applications
- Microsystems and mechanics
- Mixed-mode fracture at the molecular level
- The influence of atomic defects on the mechanical properties and breaking behaviors of gold nanowires
- Particles - bridging the gap between solids and fluids
- Cohesive surface modeling
- Cool stuff at cold temperatures
- Mechanics of polycrystalline and heterogeneous materials at different scales
- Turbulence transition in the asymptotic suction boundary layer
- Turbulent-laminar banded patterns in plane Poiseuille flow
- Optimal suppression of unsteadiness in incompressible flow
- Numerical search for the hairpin vortex solution in moderate Reynolds number
- Homotopy of exact coherent structure between planar,cylindrical and circular cross-sectional shear flows:single and double layer structure
- Statistics of global flow transition in rotating fluids with free surface
- Evolution of rotating charged drops subject to electric fields
- Numerical study of nano-particle adsorption method by lattice Boltzmann simulation
- Direct numerical simulation of rigid particle-free surface interaction
- Primary breakup of round non-Newtonian liquid turbulent jet
- Radial jet velocity components and vortex strength of a jetting jellyfish
- Stochastic resonance in breathing
- New exact coherent states in plane Poiseuille flow
- Transition delay and drag reduction in particle-laden channel flow
- The appearance of homoclinic tangle in plane Couette flow
- Global stability of an isolated cylindrical rugosity
- Experimental scaling law for the sub-critical transition to turbulence in plane Poiseuille flow
- Stability of quasi-Keplerian flow at large Reynolds numbers
- Transients states in the transition to turbulence in channels
- Computational mechanics of an adaptation model for blood vessels
- Three-dimensional instabilities in flow past a rotating cylinder
- Simulation of multiple wavy and spiral Taylor-Gortler vortices in concentric spherical gaps
- Manipulating turbulence in pipe flow
- Intermittent chaotic motions in penetrative convection
- Effects of gravity and magnetic field on the onset of the axial instability in Taylor-Couette flow system
- A variational framework for flow optimization using seminorm constraints
- Bifurcations for an incompressible flow passing over an open-cavity
- First and second centrifugal spanwise instabilities in an open cavity flow
- Ejection and sweep flows in transitional boundary layers
- Nonlinear PSE for three-dimensional structures in spatially developing mixing layers
- Response on the corner flow separation to plasma aerodynamic actuation in a highly loaded compressor cascade
- Reconsideration of the turbulent burst in boundary layers
- Nonsimilar MHD Falkner-Skan flow with localized wall heating(cooling)
- Strong viscous-inviscid interaction in the case of nonconstant wall temperature
- Direct numerical simulation of a turbulent channel flow coupled to radiative transfer
- Coupled mechanical stimulation reveals non-linear adaptive structural response
- Recent advances of structural-continual approach in fracture theory
- Towards reliable and efficient algebraic coarse-graining of parametric problems in fracture mechanics
- Circular edge singularities and edge stress intensity functions for the elasticity system in 3D domains
- The rapidest unloading in brittle fragmentation process
- Modes of vibration of damaged beams by a new p-version finite element
- Edge resonance at vibration and elastic waves excitation in three-dimentional anisotropic bodies of the hexagonal system
- The nonlinear dynamic characterisitics analysis and its application on sucker rod striings in 3D curved wellbores
- An ARMA/GARCH based approach for structural damage detection
- Numerical performance of chaos optimization algorithms based on different maps for global optimization
- Continuum-based sensitivity analysis for atomistic/continuum coupling using two-dimensional bridging scale decomposition
- Design sensitivity analysis of dynamic crack propagation using peridynamics
- Topology optimization of damping layer in shell structures
- On robust design optimization of truss structure with bounded uncertainties
- Orthogonal wavelet analysis of particle fluctuation velocity in a horizontal gas-solid two-phase pipe flow at low gas velocity
- Microscopic structure influencing macroscopic splash at high weber number
- Increase of the mean velocity of a bubble rise in a viscoplastic fluid induced by an oscillating pressure field
- A transient analysis for the electrodeformation of droplets and vesicles
- DNS of fully-resolved droplet-laden isotropic turbulence:a mass-conserving volume of fluid method
- The role of air in the dynamics of droplet impact
- A numerical experiment on breakup modes of a laminar compound jet in a co-flowing system
- The probabilistic solution of nonlinear Euler-Bernoulli beam excited by poisson white noise
- Dynamic modelling for thermoelastic Cosserat rod
- Singularity analysis on stochastic P-bifurcations
- On controlling of double pendulum by vibration of suspension point
- Semi-active control of half car vehicle model traversing rough road with magneto rheological suspension
- Constraints and energy projection method for dynamic equations of multibody systems
- Development of the full Lagrangian approach to study differential characteristics of passive admixture
- Passive scalar advection in the vicinity of two point vortices in a deformation flow
- A numerical study on the mixing characteristics of opposed jets
- Lattice Boltzmann study of flow and mixing characteristics of two dimensional confined impinging streams
- Molecular dynamics simulation of liquid-vapor binary mixture of Lennard-Jones fluids
- Analysis of different vortex breakdown states
- Stability of cyclones and anticyclones in a 5-layer quasigeostrophic model with application to mediterranean water eddies
- Stationary vortex states in a two-layer rotating fluid
- Passive scalar advection in the vicinity of ellipsoidal vortex in a deformation flow
- Effects of axial flow on the curvature instability of a helical vortex tube:modal analysis
- Vorticity force on an impulsively started finite wing at low Reynolds numbers
- Influence of the source energy conditions on cylindrical detonation in two-dimensional simulation
- Front propagation in compressible flows
- The behaviour of vortex structures near solid obstacles
- Fuzzy coating interactiòn on von Krmn vortex street
- The formation of non-axisymmetric vortex rings
- A model for high Reynolds number vortex rings
- Erosion of the granular layer due to the collision of the vortex ring
- Vortex-induced vibration of a diamond cylinder at different mass ratios
- Nonlinear geostrophic adjustment with gyroscopic waves
- Development of the γ-Re_(θ_1) transition model for high speed flows
- Early-time interface instabilities in high intensity aerobreakup of liquid drop
- Investigations of supersonic flow past micro ramp and vanes
- Quantifying Mach number similarity of compressible turbulent boundary
- A numerical investigation of injection angle effect on lateral jet interaction for revolution body
- Nonlinear stability of the supersonic boundary layer under the consideration of receptivity to slow acoustic waves
- Characterization of turbulent transition and shock/boundarylayer interaction in shock tubes
- Elementary waves of Riemann problem and interaction with a weak discontinuity
- Steady state numerical model for critical two-phase flow in nozzle
- The study of variable specific heat on the stability of hypersonic boundary layer
- Gas-kinetic unified algorithm for three-dimensional complex flows on spacecraft re-entry using Boltzmann model equation
- The flow structures and mixing characteristics of variable density vortex rings produced by a supersonic jet
- Large scale structures in supersonic mixing layers
- Investigations on shock wave attenuation by different barriers
- Transient response of hard and brittle armour materials:new insights from scaled experiments
- Evolution of solitary waves in Mindlin-type microstructured materials
- On the impact behavior of tetrahedral truss lattice structures
- On impact interactions of the damaged medium with the flow of the cavitating liquid
- Strain rate,temperature and structure effects on the flow stress of metals and alloys under shock-wave loading
- Response of thin aluminum plates to projectile impact
- Effects of large specific torsion angles,constrained anticlastic curvature and shear warping in wide beams
- Analysis of shear deformation of polymer encapsulates for laminates
- Identification of crack parameters and stress intensity factors using the body force technique
- On the theory of elasticity with residual surface stresses with applications at the micro- and nanoscale
- Nonlinear resonant ultrasound spectroscopy for onedimensional hyperelastic solid
- Theory of ferromagnetic micropolar elastic thin shells,plates and bars
- A new thermodynamic framework for material surfaces
- Scattering of SH-wave by multiple cylindrical cavities and a linear crack in elastic semi-space
- Flyer-plate impact simulations using smoothed particle hydrodynamics(SPH)
- Three-dimensional mechanism-based modeling of the failure of brittle materials under dynamic multiaxial loading
- Shock wave propagation in functionally graded cellular structures under high-velocity impact
- Analysis of wave propagation based on radial basis collocation method
- Development of a novel miniature impact test system
- Wave propagation in solids capable of phase transitions
- Study of the uniaxial dynamic behavior of salt rock under static triaxial pre-compression
- Similarity in structures subjected to impact loads when model is distorted in geometry and material
- Perturbation method in one-dimensional dynamics of an incompressible elastic medium under impact loading
- Integral identities for a semi-infinite interfacial crack in 2D and 3D elasticity
- Modeling of thin coated plates with mismatch deformation
- Identification of small multiple defects in 3D linear elastic body
- A constitutive model for a linearly elastic peridynamic body
- Polynomial stress functions of anisotropic materials
- Electric potential distribution in indentation-pre-cracked BaTiO_3 single crystal
- Three-dimensional crack analysis in ferroelectrics using configurational forces concept
- Phase field modeling heterogeneous multiferroics
- Capillary rise in an annular conical space
- Analysis of flow characteristics of rotationally symmetric seal gap with slip boundary conditions
- Interaction of resonant gravity waves in water of finite depth
- On the damping of acoustic wave propagation in fully developed turbulent pipe flow
- Nonlinear sloshing effects on the sway motion of 2D rectangular cylinders in regular waves
- Interface stability analysis of magnetic fluid by using a method for general use and nonlinear response
- Evolution of weak shocks in one dimensional planar and non-planar gasdynamic flows
- Light induced contraction and bending of liquid crystal elastomers
- Giant voltage-induced deformation in dielectric elastomers
- Micromechanical formulation of force transport in wet granular media and strength issues
- Granular element method for computational particle mechanics
- Statically admissible stress fields in loose sand heaps under the closure of polarized principal axes
- Simulation of shallow water flows in confluence channel using lattice Boltzmann method
- Stability analysis of flows in open channels partially covered with vegetation
- Theory of waves in the ocean under an ice cover
- Drop in an unsteady uniform pure shear flow and Theological properties of emulsions
- Oscillatory electroosmotic flow through a channel with slipping stripes on walls
- Electro-osmotic flow through a 1D-screen or a 2D-array pump filter
- The evaporation-driven flow in a 2D meniscus on a moving substrate
- Settling of a porous sphere in stratified stokes flows
- Optimal Taylor-Couette:numerical results
- Sidewall effects in Rayleigh-Bénard convection
- Turbulent convection at high Rayleigh and Taylor numbers
- Effect of polymer additives on heat transport in boundary layer flow
- Thermal boundary layer instabilities in viscous fluids
- Strain rate and loading complexity effects on the crushed stainless steel tubes behavior
- Parametric studies of the penetration into multilayer targets
- Response of a semi-infinite elastic beam to a moving pulse
- Anisotropic fracture of quasi-brittle aluminium alloy
- Modelling of plugging failure in structural impact
- Impact against offshore pipelines
- Numerical modelling of melts flow and interface deformation in aluminium reduction cells
- Instability of unsteady streaks with streamwise magnetic field
- Centrifugal thermomagnetic convection in an anisotropic porous medium
- Traveling magnetic field pump
- An integral eqation approach to magnetic reconnection
- Reciprocity among elemental relaxation and driven-flow problems for a rarefied gas
- Optimization of feedback control of flowover a circular cylinder
- Effects of winglets on a laminar airfoil wing
- The effect of direction of low speed winds on the performance of a split chimney
- The consistency between the gas kinetic unified algorithm and the DSMC method in describing the Boltzmann equation
- Mechanics-based verification method - application to computational models
- A new strategy for model reduction in non-linear biomechanics
- Mesoscale hydrodynamics of capillary imbibition under nanoconfinement
- A multiscale approach based on the PGD to solve nonlinear time-dependent problems
- Some investigation on the shape optimization of complex nonlinear structures
- Structural topology optimization based on analysis meshindependent density interpolation
- Structural topology optimization using meshfree methods
- Buckling of flexible electronic structure in asymmetric checkerboard mode
- P-positive definite matrices and divergence stability of non conservative constrained systems
- Numerical model for nonlinear stability analysis of spatial frames with semi-rigid connections
- A new approach for solution of buckling of functionally graded material timoshenko beams
- Hill-top bifurcation analysis for a foldable structure with imperfection
- Buckling of porous elastic sandwich plates
- Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate
- Hysteretic behavior of occurrence of strain nonuniformity in thin-walled cylinders subjected to cyclic torsion,analogous to internal buckling
- Acoustic radiation from vortex pairing in subsonic mixing layer forced by inflow instability waves with different phases
- Tsien Education/Elite Program in Mechanics
- Mechanics need not be boring to engineering students
- Computer laboratory for natural convection fundamentals
- An educative App for topology optimization
- What happens beyond Drucker's proposition when damage occurs—continuous bifurcation,damage localization and catastrophic rupture
- Void size effects on the macroscopic yield strength of ductile materials with spheroidal nanocavities
- On the modeling of damage and ductile fracture in advanced high strength steel sheets using void cell calculations
- Numerical strategies for prediction of drying cracks in heterogeneous materials:comparison upon smeared/discrete crack approach and experimental results
- Damage as a presage to composite failure
- Damage and failure in fiber-reinforced laminates
- Modeling configuration and its tunability of nonlinear wrinkling-induced delamination
- Displacement measurement of inner surface of an object in water using ultrasonic speckle techniques based on genetic algorithm
- Welding strain/slope measurements using a laser-based technique
- Measurement of residual stress in metallic materials processed by means of SMAT
- A high sensitivity DIC technique for chip-level packaging materials
- Analysis of dynamic tensile testing of cement-based composites
- Electro-thermal deformation measurement of micro film line on polymer membrane by geometric phase analysis
- An electrical resistance tomography based matrix probe for oil-water two-phase flow
- Visualization of three phase water-assisted flow of heavy crude oil and gas
- Study on the chaotic attitude dynamics of the liquid-filled spacecraft by using Hamiltonian-Casimir theory
- Advances in the comprehension of the mechanical behavior of steel corrosion products
- Micromechanics-based modeling of porous materials for application to elasto-plastic indentation analysis
- Periodic structural solids and composites:mechanics and multifunctional applications
- Three-dimensional cryomechanics analysis of satin woven carbon/polymer composites with cracks
- Micromechanical modeling of hybrid SMA composites
- Deformation and fracture of nanocrystalline platinum micropillars
- The effects of residual surface stress on the elastic fields of half-plane problems
- The flexing of locally isostatic periodic structures
- The effect of substrate on powder concentration distribution in coaxial laser cladding
- The effect of runout on the stability of milling with variable helix tools
- Singularity of the energy propagation in anisotropic fluidfilled porous materials
- Phase change in porous media under constant heat flux
- Modeling pH-sensitive hydrogel for microfluidic control
- A theoretical framework for modeling the chemomechanical behavior of porous media with multiphases and multispecies
- Thermal stresses around a cylindrical hole in a transversely isotropic poroelastic medium considering local thermal non-equilibrium
- On some features of gas flows through porous objects with heat sources
- The FUPG finite element model of contaminant transportation in soil with nonlinear sorption
- Flow pattern formation in a liquid metal column by pulsed excitation of a rotating magnetic field
- A RANS numerical model for calibration of Lorentz forece flowmeter applying to metallugy industry
- Noncontact electromagnetic flow measurement in electrolytes
- Deflection of laminar liquid metal flow by a magnetic point dipole
- Experimental study of turbulent spin-down flows of liquid sodium
- Impact of soft iron impellers in the Cadarache dynamo experiment
- Universal deformations of growing solids
- Uniaxial compression experiments of ceramics at quasistatic and dynamic strain rates
- Deformation transfer model of spacecraft solar cell and substrate
- Anticipatory systems in mechanics of continua
- Granular rheology:fine tuned for optimal efficiency?
- Numerical investigations of micro-structural phenomena inside shear localization in granular bodies using DEM
- Hydrodynamic interactions in dynamical density functional theory
- Rheological properties of Bubble suspensions in yield stress fluids
- Concentration instability of sedimenting spheres in a second-order fluid
- A theoretical study of the effect of polymer concentration on turbulent drag reduction
- Role of viscoelastic stresses in turbulent boundary layer flow of drag-reducing fluid
- Finite Reynolds number effects for dense suspensions in shear flow
- Laboratory experiments on thermal instabilities in a yieldstress fluid
- Micro inhomogeneous deformation and fatigue life of a metal under symmetric strain cycle
- Damage model for brittle refractory materials under thermal shock conditions
- A new plasticity criterion for porous single crystals
- An extension of gurson's model to arbitrary ellipsoidal voids
- Debonding of face/core interface of a circular sandwich plate due to hail-like impact
- Latent heat effect on the microstructures of single crystal shape memory alloys
- A constitutive model for coupled transformation and plastic behavior of shape memory alloys
- On kinetics of chemical reactions fronts in elastic solids
- Gradient dynamics formulation of evolution equations for thin films of complex fluids
- Computational and experimental studies on motion of yield stress plugs in channels
- Large drops of a power-law fluid in a thin film on a vertical fibre
- On advancing contact lines with a 180° contact angle
- Self-similar thermally driven rupture of thin liquid sheets
- Stability analysis of a thin liquid film on an axially oscillating cylindrical surface in the high-frequency limit
- Slip or not slip? A comparison of the interface formation model with conventional theories
- Numerical modeling of the crushing response of aluminum open-cell random foams
- Dynamic crushing of hexagonal honeycombs with various cell-wall angles
- Impact and blast performance of sandwich panels with cellular honeycomb and lattice cores
- Brittle fracture of open-cell kelvin foam
- Inertia effect in the impact behaviour of cellular materials
- Conservation laws for materials with a nonlinear power law behavior in antiplane deformation
- Analyticity and causality of rheological models
- General criteria of material instabilities
- Modeling of AISI L6 steel behaviour in the presence of thermo-viscoplastic coupling
- A new approach for analysis the elastoplastic flows
- Multiscale constitutive model of plastic flow discontinuities at extremely low temperatures
- Thermo-rheological simplicity of carbon black filled rubber
- A modified fractional zener model for dynamic mechanical properties of CB-filled rubber
- Constitutive relationship modeling and prediction of armor steel using an artificial neural network
- Mechanism of deformation in nanocrystallized materials
- A new strain-space microplane plastic-damage model for concrete in compression
- Effects of thermal ageing on the large strain viscoelastic response of epdm rubber:experiments and constitutive modeling
- The charge-induced actuation of nanoporous metals
- Velocity attenuation and force transfer in foam-filled layered claddings subjected to blast and impact
- Hierarchical honeycombs with enhanced mechanical properties
- Experimentally-based modeling of trabecular bone as a complex cellular material
- Mechanical properties and failure modes of carbon fiber composite pyramidal lattice structures
- Geometrically-controlled stimulus responsive surface friction
- Multiharmonic balance analysis of a friction oscillator including a bolted joint
- Effects of stress-triaxiality and surface friction on polymer scratch behaviors
- Tool forces and deformations in friction stir welding
- Three-dimensional FE model of frictional heat generation in a disc brake
- Reconnection of very long vortex pairs with a transition to turbulence
- A multi-layer model of roughness effect in turbulent pipes
- Normalization of the mean rate of energy dissipation in turbulence
- A multi-layer model for turbulent kinetic energy in pipe flows
- Reynolds number effects on the spectra from a turbulent free jet of initial square cross-section and the kolmogorov isotropy "law"
- Energy dissipation in fully developed turbulence
- Investigation of relaxation eddy viscosity model for coherent structure dynamics using tomographic PIV
- Damage detection in CFRP bolted joints using embedded optical fiber strain distribution monitoring
- Optimal design for hybrid composites under flexural loading
- Modeling of compressive strength of z-pinned fiber composites with the distorted fiber arctecture
- Micromechanics of fiber-crack interaction:bridging fiber
- Analysis of effective properties of composites by the boundary element method
- Microscopic and macroscopic instabilities in particlereinforced elastomers
- Ultra-high stiffness and damping composites and structures due to constrained mechanical instabilities
- On constructing analytical solutions for the postbifurcation states of a compressible hyperelastic tube under compression
- Pure bending of pseudoelastic NiTi tubes
- Multi-functional actuation of shape memory composite
- On principle of stationary action for electromagnetic elastic solids
- Advances in mechanics of growing solids
- To united system of equations of continuum mechanics and some mathematical problems for thin-walled structures
- Investigation of non-resonant vibration behaviour by a newly developed time-averaged ESPI method
- Spontaneous propagation of self-assembly in a continuum medium
- Existence of traveling wave solutions for an initial value problem of piezo-viscoelasticity
- The effect of the matrix tension-compression asymmetry on damage evolution in porous plastic solids
- Effect of twinning on the large strain torsion of extruded AZ31 bars
- Shakedown of functionally graded structures subjected to plastic strain induced phase transformation
- Thermodynamic consistent formulations of viscoplasticity and damage in ferrite steel
- Mullins' effect in polymer/clay nanocomposites:observations and constitutive modeling
- Droplet splashing
- The mechanics and prediction of wall-turbulence
- Dynamic damage,strain localization and failure of ductile materials
- Dynamics of carbon dioxide bubble shrinkage in microchannel flow determines mass transfer in physical solvents
- Motion of bubble rings in viscous fluid
- Dynamics of a drop trapped inside a circular hydraulic jump
- Electric field induced drop-drop interactions
- Prediction of bubble sound emissions using coupled oscillators
- Vortex shedding for drop creation
- About oscillation effect on the penetration depth of water drop induced vortex ring
- Variable topology boundary element method(VTBEM) for simulating underwater explosion(UNDEX) bubble
- Drop evaporation on an isothermal or adiabatic solid surface
- Horizontal rolls in a cylindrical layer with a local heating
- Analysing the spatio-temporal flow behavior in RBconvection using global statistical analysis
- PIV study of behavior of interaction of twin fountains in homogeneous fluid
- Periodic and quasiperiodic temperature oscillations in mixed convection
- Exact solutions at the edge of turbulence
- Three-dimensional flow instabilities on disks of different aspect ratios
- Three-dimensional finite-amplitude solutions in rotating Poiseuille flow
- Inviscid instability of a stably stratified boundary layer
- Tracking of spatially localized solutions by a filtering method:application to the swift-hohenberg equation
- Excitation of unsteady Goertler-instability modes by freestream vortices
- Transport of admixture in a stationary vortex flow
- Construction and evolution of vortex-surface fields
- Tackling structural complexity by Jones' polynomials
- Lagrangian and Eulerian hybrid method for weakly nonlinear stability of a rotating flow in a cylinder of elliptic crosssection
- A point vortex model of singly-periodic four-vortex wake structures
- Experiments on vertical motions of rotating flows over variable topography
- Experimental study of synthetic jet vortex rings impinging on a wall
- On the pairing instability in helical vortices
- Incoprorating research into first year fluid mechanics
- Game-based interactive software for mechanical laboratory
- Mechanical education for nanoscience and nanotechnology in future
- Toy models illustrating complex mechanical phenomena
- Challenges to present a postgraduate finite element course in structural mechanics at the university of Pretoria
- Methodology for modeling surface and subsurface damage due to contact loading
- Effect of the gap conditions in sliding contact of the periodic punch on the viscoelastic foundation
- Method of reduction of dimensionality in contact mechanics
- Consistent beam theories
- Stability of aneurysm solutions for a fluid-filled elastic membrane tube
- On the dispersion relation between nonlocal elasticity and lattice dynamics
- The damage mechanics approach of bone considering the mechanical-electric-magnetic coupling effects
- Damage development in steels subjected to exploitation processes:attempt to correlate the parameters of different testing techniques
- Quantitative damage evaluation of thermal barrier coatings subjected to tensile loading using acoustic emission method
- Analytical relations for random fatigue of single damage variable models
- Nonlocal conditions for the transition from damage to a localized failure in granular and fibre-reinforced composites under quasistatic proportional and nonproportional loading
- Simulation and validation of a concurrent fatigue crack growth model
- On coupling of multi- and transcale damage in hierachical mlcrostructure of solid
- Large scale optimal transportation meshfree(OTM) simulations of hvpervelocitv impact
- The star shaped crack patterns of broken windows
- Dynamic failure in metal-polymer bilayers
- Design of shaped charge as oil well perforator
- On the wave catching-up phenomenon in a two-layer nonlinearly elastic composite bar
- Impact deformation of functionally graded cellular solids
- Dynamic responses of an elastic ring on viscoelastic foundation to external impact
- Reduced stiffness critical pressure of spherical shells having localised imperfections
- Dynamic effects during alternate infiltration and drainage of unsaturated granular media (hydraulic ratcheting) studied using the Lattice Boltzmann method
- Cross-independence closure for statistical mechanics of homogeneous isotropic turbulence
- Experimental study of relative velocity statistics and collisions of inertial particles in turbulence
- Geometrical features of streamlines and streamline segments in turbulent flows
- Toward a simplified wall-modeled large eddy simulation at high Reynolds number
- Numerical simulation of wall-bounded turbulent flows with linear effective viscosity model:drag reduction and new mechanistic insight
- Relaminarization of wall turbulence by high-pressure ramps at low Reynolds numbers
- Energy and helicity cascades in rotating turbulence
- A non-frozen flow model for pressure space-time correlations in turbulent shear flows
- Dynamics and rheology of micellar fluids from molecular dynamics simulations
- Filament stretching of pressure sensitive adhesives with gas inclusions:a 3D hyperelastic-viscoelastic model and numerical simulations
- Quantifying chain reptation in entangled polymer melts:topological and dynamical mapping of atomistic simulation results onto the tube model
- Transient convection-diffusion modelling of peak temperature in orthogonal cutting
- Film flow over small-amplitude step topography
- Rivulet evolution in gravity-driven thin-film flows
- A model for particle laden flow in a spiral concentrator
- A first integral of Navier-Stokes equations:thin film flow applications
- On two minimalist models for moving/evaporating contact lines without slip on a macroscopically dry homogeneous substrate
- On the dynamics of frictional contact layers
- A unified analysis of a micro-beam,droplet and CNT ring adhered on a substrate
- Simulation of dynamic contact behaviors of saturated porous media involving large deformation with the coupling convected particle domain interpolation method
- Numerical solution of non-smooth multibody systems
- Thermo-poro-elastic analysis of freezing behavior of porous materials saturated with saline solution
- Action micromechanism between gemini surfactant DNGs and core porous wall
- Coupled multiphase flow transport in deformable rock with consideration of microbiology
- Shape memory alloys and collisions
- Phase transformations limit surfaces construction for elastic solids based on exact energy lower bounds
- Influence of texture on the effective response of multiphase steels
- Volumetric phase transitions and cavitation in polymer gels
- Snap-buckling instability of beams and shells
- Localization and loss of macroscopic ellipticity in microstructured solids
- An efficient Hermite reproducing kernel meshfree method for buckling analysis of Kirchhoff plates
- Entropic forces in the mechanics of solids
- Index of authors
- Introduction
- ICTAM2012 Program Overview
- Preface
- Multiscale fluid mechanics and modeling
- Dynamics and rheology of elastic particles in an extensional flow
- Droplet impact near a millimeter-size hole
- Slender body theory for the generation of microemulsions and microbubbles with medical applications
- Formation of bubbles in planar co-flowing air-water sheets
- Gas influence in drop impact on a dry solid surface
- Drop impact on(superheated) surfaces:high-speed color interferometry allows to quantify the role of air and vapor layer
- Simulation of aerosol evolution in a turbulent flow
- Three-dimensional internal flow structures of a moving droplet actuated by wettability gradient
- An efficient computational model for large-scale simulations of moving contact lines
- Similarity solutions for coalesce of two sessile drops
- Evolution and breakup of viscous rotating drops
- From passive tracer to bubbles dispersion in Taylor-Couette flows
- Bubble dynamics in a compressible viscoelastic medium
- Fluid mechanics approaches to modeling the environmental consequences of nuclear accidents and mud volcano eruption
- Nonlinear vibrations of axially moving viscoetastic beams with supercritical transport speed
- Nonlinear vibrations of hyperelastic membranes resting on a nonlinear elastic foundation
- A new variational method for free vibration analysis of conical shells with discontinuity in thickness
- Analysis of non-linear vibrations of a viscoelastic cylindrical shell under the conditions of internal resonance
- Nonlinear vibrations of laminated circular cylindrical shells:comparison of different shell theories
- Minimum-time damping of a physical pendulum
- Rectilinear motions of multi-module vibration-driven systems:effects of the phase shifts among internal motions
- Synchronization of pendula rotating in different directions
- Modal interaction in the inextensional beams on the elastic foundations
- A mechanism for generating a packet of hairpinscomparison between model and experimental results
- Double diffusivity on miscible fluid flow in a channel
- Weakly nonlinear theory for Rayleigh-Taylor instability of rotating fluids
- Linear mechanisms of the sensitivity of jets to external forcing
- Mixed cross spirals as interim solutions in the Taylor Couette system
- Vortex-wave interaction theory and self-sustained processes in shear flows
- Angular momentum transport and turbulence in laboratory models of Keplerian flows
- Direct numerical simulations of high-speed boundary layer transition including adverse pressure gradients
- Boundary layer transition in hypersonic boundary layer
- DNS of turbulent transition in channel flow induced by boundary layers interaction
- Shear layer instabilities in variable density transverse jets
- Stability of axisymmetric convection in cylinders heated from below
- Transition delay of a two-dimensional channel flow due to longitudinal wall osicillation
- Rapid and precise particle manipulation in microfluidic devices
- Kinetics of interfacial adhesion strength and fracture
- A variational approach to thermal fracture
- Interfacial cracks in bi-material solids:stroh formalism and skew-symmetric weight functions
- Static and dynamic fatigue of cracked piezoelectric ceramics in three-point bending under AC electric fields
- Hardening cohesive zone model for size effects in the necking and ductile fracture of metals
- Analysis of complex crack problems by the polygonal numerical manifold method
- An interaction energy integrai method for an interface crack between two nonhomogeneous materials under thermal loading
- Molecular simulations of the uniaxial tension on PVDF:from a single molecular chain to an amorphous cell
- Molecular dynamics simulation of crazing in amorphous glassy polymers
- Isogeometric shape design sensitivity analysis of elasticity problems using multi-resolution and h-refinement approach
- A review of topology optimization approaches
- Piecewise constant level set approach to structural optimization of contact problems
- Twinning-mediated plastic deformation in Au nanowhiskers
- Mechanism of dislocation jam and starvation on crystal plasticity in submicron pillars
- Intrinsic lengths govern failure mode transition in metallic glasses
- A quasicontinuum approach to modeling discrete microstructures
- Some observations on the size effects in nanotwined metals and their theoretical explanation
- On constitutive equations for processes of severe plastic deformation
- Micromechanical modelling of the softening of metallic materials during cyclic and creep loading
- Steady granular flow:local and nonlocal approaches
- Dislocation-mechanics-based constitutive descriptions of crystal plasticity of metals:an overview
- Strain hardening for steel under non-proportional loading
- The influence of steel fiber plasticity on kink-band formation
- Correlation model for noise generation by large vortex oscillations in turbulent jet
- Acoustoelastic theory for a fluid-saturated porous media
- Topology optimization of the three-dimensional fish tail
- Segregation phenomena in flowing suspensions of deformable particles:toward an understanding of cell and particle dynamics in blood flow
- Unsteady boundary layers on flapping wings
- Effect of spatial confinement on helical swimming in Stokes flow
- Aerodynamic forces and power of a hovering hawkmoth in different wing motion
- Aerodynamics of chestnut tiger butterfly in forward flight
- Effect of wing deformation on the flapping flight of butterflies
- Osmotically driven flows in plants
- Analysis of an aero-acoustic flow field using dynamic modes
- Compressible fluid-structure interaction simulations of an inflatable tension cone decelerator for planetary re-entry
- On the linearity of the quieting of high speed jets by heating
- Supersonic flow structure on compression surfaces of model inlet under plasma imoact
- On the evolution of a heavy-gas cylinder accelerated by a cylindrical converging shock wave:effect of initial conditions
- A multi-layer model for mean velocity and density profile in compressible channel flow
- A new method for measuring specific heat ratio of combustion gases in hypersonic flow
- Visualization experimental and numerical investigation on the muzzle flow
- Experimental study on vortex/bow shock interaction at Mach number of 6
- Inviscid quasistatic modelling for unsteady shock reflections with separation
- Disturbance evolution in a Mach 4.8 boundary layer with separation
- Waves in pyroelectric materials
- Mechanics of epidermal electronics
- The effct of electrostatic tractions on the fracture behavior
- Nonuniform ferroelectric domain switching criterion and related toughening driven by two-parameter crack-tip stress field
- Flutter instability of cantilever beams in viscous flow
- Efficient methods to take into account the fluid lag in hydraulic fracturing simulations through a variational inequality formulation
- Wingtip trajectory of a flapping micro-air-vehicle in its forward flight
- A new receptivity mechanism of supersonic boundary layers to free-stream disturbances
- Flat-plate boundary layer with continuous freestream turbulence:a preliminary direct numerical simulation study
- An interferential streak instability of hypersonic boundary layer over a circular cone
- Low-dimensional modelling for optimal streaks in the Blasius boundary layer
- Experimental study of localized disturbances at straight wing boundary layer
- Turbulent separation from a bluff body:the trailing-edge case
- Is the wall "necessary" for generating turbulence in wall-bounded flows?
- Effects of streaks on second-instability in boundary-layer transition
- On the definition of logarithmic region in zero pressure gradient turbulent boundary layers
- Mean topological evolution in compressible turbulent boundary layer
- Comparison of turbulent pipe and boundary layer flows
- Prediction of skin-friction reduction by opposition control in turbulent channel flow
- Experimental investigation of the flow around a circular cylinder in the turbulent boundary layer
- The effect of obstacles on propagation mechanism of 3D detonation wave
- Numerical simulation of cellular detonation in space
- Beating of artificial microcilia
- Structure-based modelling of human left ventricle using an extended FE-IB method
- Self-propulsion & swimming in viscoelastic fluids
- Analysis of the effect of ground proximity on the unsteady flows past oscillating airfoils at low Reynolds numbers
- A new solution of Euler's equation of motion with helicity
- A generalized reciprocal theorem for predicting the force and torque on bodies moving in an inhomogeneous flow at arbitrary Reynolds number
- Snapshot-based flow analysis with arbitrary sampling
- Cell membrane dynamics during sonoporation investigated by microfluidic single-cell analysis
- The effects of membrane laws on the capsule flow in microfluidic channel with square cross-section
- Three-dimensional flow reversal in droplets in Hele-Shaw cells
- The super-thermohydrophobic effect
- Analysis of wall effect on the process of diffusion of nanopartices in a microchannel
- Many-body hydrodynamic interactions in a microchannel
- Electro-viscous interactions between sedimenting particles
- On the dynamics of turbulence near a stress-free surface
- Weakly nonlinear bores in laminar high Reynolds number two layer fluids
- An exact 3D tornado-like vortex solution
- Analytical and numerical bedrock reconstruction in glacier flows from free surface elevation data
- Dynamic stress experimental study on asymmetric beam to column connection structure
- Experimental investigation of stress concentration for FGMs using CGS
- Deformation observation of closed-cell aluminum foams in the split Hopkinson pressure bar test
- Experimental fringe analysis by compressive sensing
- Measurement and simulation of the streamwise solid fraction of a granular hydraulic jump in a rectangular chute
- Experimental study on the modulated aeolian barchan dune
- Edelen's dissipation potentials and the viscoplasticity of granular media
- Three dimensional simulation of granular jet scattering
- Partially-cohesive granular flows:rheology and segregation
- Hopper flow prediction using a constitutive model with microstructure evolution
- Cases of integrability in dynamics of a rigid body interacting with a resistant medium
- Scale interaction and ordering effects at fracture
- Direct numerical simulation of multiphase flows with volume of fluid methods
- Curvature singularity and film-skating during drop impact
- Transient break-up,saturated pulsations and static/dynamic buckling of insonated contrast agents—Effect of the constitutive law and characterization
- Gas solubility effects on slug flow
- Interaction between large wind farms and the atmospheric boundary layer
- Quasi-static bubble formation from submerged needle under non-uniform electric field
- Numerical investigation of the effects of large particles on turbulent channel flow
- Modeling of gravitational convection in disperse systems:instabilities,vortex generation,and boycott effect
- Capillary transport of cryogenic liquids in porous media
- Investigation on particle-fluid energy transfer in turbulent channel flow
- A moving mesh method for three-phase flows with triple junction points
- Evaporating-freezing phenomena of water droplets during quick depressurization
- Turbulent particulate pipe flow at constant Reynolds number
- Visualization study on transient liquid film behavior and inner gas flow after rupture of a soap bubble
- Capillary penetration via a mean-field lattice Boltzmann model for multiphase flow
- Impacting on breakup process of free round jet by manmade pulsation
- The concept of self-consistent field applied to the inviscid suspensions
- Rotation of ellipsoids in canonical flows:Effects of particle and fluid inertia
- An investigation of droplet impingement on liquid film considering the effect of evaporation of liquid
- Interaction of rising bubble and particle in oscillating liquid
- Droplet impact on a hydrophobic substrate with circular grooves
- Numerical simulation of fragmentation of liquid jet in vacuum based on lattice Boltzmann method
- Drag of laminar flow over trapped bubbles
- Study of liquid destabilization and stripping in a liquid-gas mixing layer
- Supersonic controlled microjet
- Drops and bubbles simulations using volume of fluid and octree adaptative refinement
- Approximations of incompressible large deformation elastic problems:some unresolved issues
- A new front tracking method for simulation of high-velocity impact problems
- A fast subspace iteration procedure for improving automated multi-level substructuring
- Initiation,transport and deposition of granular avalanches:current progress and future challenges
- On the dual roles of viscosity to the flow instability
- Hydrodynamic instability of the spiral flow
- Comparison between experimental and numerical analysis of stability of liquid columns in an axial gravitational field rotating around an eccentric axis
- Effects of surface corrugation on boundary layer instability
- Investigation of correlation-based transition model coupled with Spalart-Allmaras turbulence model
- The reliability of the improved e-N method for boundary layer transition prediction on a flat plate
- An experimental study on the Richtmyer-Meshkov instability of a minimum-surface interface with sinusoidal boundaries
- Variational formulation of continuum mechanics based on the lagrangian with the friction force
- Magnetic field effects on three dimensional stability of natural convection flows in differentially heated cavities
- Contribution to the Taylor-Couette flow control using the inner cylinder cross-section variation
- Linear stability analysis of lid-driven cavity flow using a spectral element method
- The key role played by the swift change of the stability characteristic of mean flow in bypass transition
- Stability analysis of compressible swirling jets
- Transient growth of perturbation in rotating Poiseuilie flow
- Spectral broadening and flow randomization in free shear layers
- Stabilization and universality in hele-shaw flows with many interfaces
- Experimental investigation on later transition stage of laminar streak
- Optimal transportation meshfree approximation schemes for fluid and plastic flows
- Efficient numerical approaches to challenging problems in the frontier of mechanics and biology
- Second order accurate derivatives and integration schemes for meshfree methods
- Onset of asymmety and three-dimensionality in transitional round fountains in a homogeneous fluid
- Nonlinear forced vibrations of in-plane translating viscoelastic plates with 3:1 internal resonance
- Elastic vibrations of nanoparticles with the effects of surface stress and surface inertia
- Optimised progression rates by means of vibro-impact motion
- Research advances of exact solutions for free vibrations of plates and shells
- Rectilinear motion of a two-mass point system in a resistive medium
- Existence of periodic orbits for the CR3BP under a new frame
- Examinations of nonlinear isolators using power flow approach
- Response amplitude of nonlinear self-excited microcantilever probe
- Stationary response of Bouc-Wen hysteretic system under Poisson white noise excitation
- Responses of axially moving viscoelastic beam under narrow-band random excitation
- Thermoelastic damping of the axisymmetric vibration of bilayered circular plate resonators
- Probabilistic solution of the stochastic oscillators with nonzero mean response
- Bolt thread stress optimization
- Generation of set of vanishing elements in topology optimization
- A topology optimization procedure based on a phase field approach and an active set strategy
- Inertial microfluidics:high-throughput cell and particle manipulation
- Simulation for gas-structure interaction in inflatable membrane beams
- Optical-force-induced migration of an elastic capsule in a uniform flow
- Dynamics of resonance of a floating body in a channel with application to wave power extraction
- Forced nonlinear vibration of pipes conveying supercritical fluid
- An unique nonlinear vibration phenomenon of a liquidelastic shell coupled system
- Numerical investigation of interactions between two particles with different sizes
- Simulation of the interaction between compressible fluid and thin elastic plate by the modified ghost fluid method
- Computations of drag force on cylinder in oscillatory viscous flow,and comparison to experiments
- An adaptive immersed boundary method for fluid structure interaction with boundary mass
- Investigation of traveling wave in vortex-induced vibrations of long flexible cylinders
- Wave interaction with two elasticaliy mounted vertical cylinders
- A theoretical solution of a water- spherical shell-damping layer interaction system for underwater noise reductions
- SPH simulation of free surface flows with moving objects
- The simulation of fluid-structure interaction on two flexible cylinders subjected to an annular flow
- Dynamic characteristics of rigid cylindrical container with multiple elastic annular baffles and partially filled with liquid
- Hamiltonian dynamics of a particle subject to time-varying gyroscopic and potential forces
- Stability and stabilization of motion of the rigid body with elastic compartments containing an ideal fluid
- A weakly nonlinear mechanism for mode selection in swirling jets
- Instabilities of a cylinder wake in a stratified fluid
- Transition in rotating annulus with thermal gradient:experiments and numerical simulations
- Instability of films flowing over topography with eddies
- Highly dissipative perturbations in a Couette flow
- Multiple buckling states of falling viscous threads
- Continous and discret material modelling and the onset of criticality
- Fast fracture in slow motion:dynamic fracture in brittle gels
- DLR's morphing activities within the european network
- Smart skins and actuators for morphing structures
- Flow around an obstacle between parallel walls
- A skew-symmetric formulation for the simulation of multiphase turbulent flows
- An improved lattice Boltzmann model for incompressible flow
- Simulation of anisotropic Savage-Hutter model using gas kinetic scheme
- The mathematica package BVPh 1.0 for nonlinear problems
- Stress analysis of multilayered coating systems using a new meshless boundary collocation method
- An advantage of spectral element method for solving incompressible Navier-Stokes equations
- Overset grid based simulation of moving body in viscous flows with free surface
- Accurate boundary conditions for one-dimensional atomic chains
- The flow past a lattice of airfoils and the determination of separation points in a viscous fluid
- An improved surface tension model for numerical simulation of interfacial flow by smoothed particle hydrodynamics method
- Improved adams linear multi-step method based on extended precise integration method
- Multi-material eulerian method and its large-scale computation for 3D explosion and shock problems
- The influence of surface effects on strength and stability of kirsch Dlates
- Structural-temporal approach for milti-scale fracture dynamics
- Mechanics of edge cracks due to a phase transformation
- Determination of stress intensity factor for interface crack under uniform heat flow by crack tip stress method
- On the generalized Phillips' spectra for wind waves
- Attenuation of sea waves by a vegetation canopy
- Propagation of interfacial solitary water waves in presence of surfactants
- Multiscale plasticity:reductionism or emergence?
- Stress-gradient plasticity:concept and application
- Numerical simulation of three-dimensional separated flow over bodies with some vortex method
- Application of mosaic-skeleton approximations method to accelerate calculations in the problems of modeling flows past bodies with discrete vortices method
- Application of discrete vortex singularities method to the aeroelastic problems in parachute constructing
- Separated vortical flow control by idealized partial-slip boundary
- Nonlinear motion of current-vortex sheets in magnetohy-drodynamic flows with density stratification
- The origin of flow asymmetry formation over slender body of revolution at high angle of attack
- Influence of geometric layout and blockage on the performance of vortex shedding flowmeter
- Applications of vortex dynamics in multiply connected domains
- Interaction of a wall jet with a wake flow-vortex statistics
- Numerical study of a vortex ring impacting on a circular cylinder
- Interaction of two coaxial Dyson's vortex rings inside a circular cylinder
- The circulation model of vortex flow of a viscid wall layer
- Wall effect on the critical spacing for flow past two tandem cylinders
- Stability,resonances and instability of the steady rotation of a system of three equidistant vortices outside a circle
- Theoretical relations between quantities at a water surface and the instantaneous subsurface flowfield
- Discrete dislocation analyses of size effects in plasticity
- Understanding the size effect in the mechanical properties of nanotwinned copper
- Atomistic simulations and modeling of plastic deformation and fracture in nanotwinned metals
- Mechanics of chirality transfer in bio- and nano-materials
- In-situ and image-based force measurement of a dry granular flow down an incline
- Classical and cosserat elasto-plastic constitutive equations for pressure-dependent yield
- Spreading of a cohesive granular matter on a smooth inclined plane submitted to vibration
- Strain gradient solutions for half-space contact problems
- Size-dependent behavior in nano-dielectric Bernoulli-Euler beam
- Atomistic simulation of compression deformation behavior in magnesium single crystal
- The effect of surface elasticity on morphological instability of a stressed solid
- Comparison between fluid-structure interaction and fluid dynamic simulations of stented coronary arteries
- Thrust production of a flexible low-aspect-ratio foil
- Shape and motion optimization of 3D self-propelled swimmers
- Slipping Stokes flow about a solid particle
- Motion of a microswimmer in Poiseuille flow
- A numerical study of the MPS method for simulating non-newtonian free surface flows
- A new microfluidic drive and control method based on the liquid crystalline backflow
- Onset of thermal convection in a viscoelastic fluid-saturated porous medium between coaxial rotating cylinders
- The linear stability of plane creeping Poiseuille and Couette flow of Burgers fluid
- Shear strengthening viscosity and shear-rate-dependent modulus model for a waxy crude oil
- Time periodic EOF of power-law fluid in a cylindrical microcapillary
- An experimental study of non newtonian fluids in pipe flow
- The surface deformation effect in the process of anomalous thermo-viscous liquid flow
- Moving particle semi-implicit method based on large eddy simulation
- Numerical investigation and analysis of RAE2822 airfoil in ground effect
- Turbulent modeling of wall-bounded flow with memory effects
- A multi-layer description of subgrid-scale effects
- Selective reduction of triad interaction in hall magnetohy-drodynamic turbulence
- The flow around bypass crossover sub in fracturing process of horizontal wells LDA experiment
- Experimental investigation of hypersonic boundary layer instability and transition by wavelet transform
- Time correlations in compressible isotropic turbulence
- Representative flow structure behind an Ahmed vehicle model
- Elastic wave propagation in multilayered Bragg Cells
- A method for calculating the elastic wave band structure of two-dimensional phononic crystals with interface/surface stress effect
- Superlyophilic spreading of a droplet on the forest of pillar arravs
- Numerical simulation of fluid-strcture interactions with a direct-forcing fictitious domain method
- Oblique waves lift the flapping flag
- Unsteady coupled thermal boundary layers
- Generalized autocorrelation function in Rayleigh-Bénard convection
- Unsteady natural convection in a reservoir induced by ramped isothermal surface heating
- Conjugated convective-conductive heat transfer in micro channels on polymeric nanocomposite substrate
- Critical point for pipe flow,and beyond
- Fractal cracking pattern characterization in heterogeneous materials under compression
- Transition to sustained turbulence in plane Couette flow
- On the growth and morphology of icicles
- Revealing the geometry of turbulent pipe flow attractor by symmetry reduction
- A mathematical model of an MR fluid in operational conditions of a damper's work
- In situ observation of eiectric field induced crack propagation in BaTiO_3 crystals along loading direction
- Effects of surface maxwell stresses on piezoelectric fracture
- A micro-macro description for magnetorheological fluids based on enhanced magnetic dipole model
- Optimum structure design of a multilayer piezo-composite disk for control of thermal stress
- Penetrating process simulation of a ball in granular media
- Vorticity banding and stress localization in a granular fluid
- Diffuse failure in granular media:influence of the loading path
- Finite-temperature simulation of nanovoid growth by dislocation emission
- Modeling of nanocrystalline metals based on competing grain boundary and grain interior deformation mechanisms
- Debonding analyses in anisotropic materials with strain-gradient effects
- Analysis of kink-fold deformation based on disclination theory
- Micromechanical modelling of the deformation kinetics of semicrystalline polymers
- On the control of friction induced vibrtions through an additional sequential friction-SDrina
- Fatigue crack growth analysis of short cracks in concrete
- Saturated dislocations transient propagation-evolution in olivine structure under ultra high-coupled thermal-force fields
- The weight function for cracks in three-dimensional quasicrystals
- Analysis of the influence of stress gradient on the non-propagating fatigue crack
- Weight functions of a crack in a two-dimensional micropolar solid
- The scaled boundary finite element method for 2D fracture analysis of piezoelectric materials
- Experimental investigations on the mixed-mode essential fracture work of PC/ABS alloy
- Critical intensity of singular stress for adhesibe joints
- Study of Griffith crack nucleation in a disclinated nanowire with a continuum model
- Analytical and numerical investigations of the character of stresses in the vicinity of singular points in the framework of the classical and asymmetric theory of elasticity
- Stress-strain curve of a fiber network
- Necessary conditions and approximate self-consistent estimates for the overall creep function of viscoelastic heterogeneous materials
- Chiral effect in planar isotropic micropolar elasticity
- Three-dimensional piezoelasticity solution for hybrid piezoelectric laminated plates featuring viscoelastic interfaces
- Electromechanical transition in a dielectric elastomer:giant linear deformation and failure modes
- Upper and lower limits in the elastic properties of low-shrink sheet molding compounds
- Stress-strain relation of Bi_2Sr_2CaCu_2O_x/AgMg superconducting round wires based on fractal characterization of the rough surfaces of individual filaments
- Quasi-static indentation tests on closed-cell Al foam
- Numerical study on the effects of equi-biaxial residual stress on mechanical Properties of Nickel film by means of nanoindentation
- A higher order solution for cylindrical bending vibrations of functionally graded plates
- A unified constitutive model for interface debonding and friction
- The statistical-second-order two-scale analysis for thermoelastic coupled performance of the composite structure with consistent random distribution of grains
- Influence of friction between the contacting phases of the fiber composite on its stress-strain condition
- A micromechanical model for the effective viscoelastic response of semi-crystalline polymer-clay nanocomposites
- Receptivity of the boundary layer on a wing surface to elastic vibrations of the wing surface
- Several measurement results on the wall-bounded turbulent boundary layer utilizing tomographic TR-PIV technology
- Transition route of Klebanoff type in hypersonic boundary layers
- Atheroma plaque vulnerability prediction using machine learning techniques
- Gravity-driven flows in stratified fluids
- The evolution and stability of axisymmetric intrusions
- Internal wave focussing by horizontal oscillations of a torus
- Physical analysis of compressibility effects in the transonic flow around a supercritical airfoil at high Reynolds number by numerical simulation
- Mach number similarity of large-scale structures in compressible channel flows
- Effect of thermal actuators on drag reduction in a Mach 8 bow shock
- Three-dimensional thermal-stress analysis of non-homogeneous elastic composites
- Comparision of non-Euclidean continuum model with strain gradient theory
- A point-force elastic problem for exponential functionally graded coatings
- An equilibrium problems of a rectangle in the Cosserat elasticity
- Analytical solution of transverse crack problem under a thin layer
- Calculation of elastic constants of the torsion bars with helical anisotropy using the methods of optimization theory
- Dispersion of particles on fluid-iiquid interfaces
- Evolution of suspension drops settling under gravity in a viscous fluid near a vertical wall
- Stokeslet induced slip flows in a spherical container
- Lagrangian tori induced by precessing bent rods in viscous dominated flows
- Stability of pressure-driven flow in open fluidic channels
- Space-time characteristics of compliant wall in turbulent channel flow
- Improving the wetting stability on submersed superhy-drophobic surfaces for drag reduction applications using hierarchical structures
- Time-averaged acoustic forces acting on a circular cylinder in a viscous fluid
- Dynamic properties of confined water molecules in nano-scale systems
- Particle transport with continuous frequency sweeping and acoustic radiation forces
- Migration of flexible fibers entrained by Poiseuille flow in a microchannel.
- Rapid cell separation in double spiral microfluidic channels
- A hybrid computational model to predict separation of cells in hydrodynamic metamaterials
- Directly resolving particles in an electric field and applications to heterogeneous dielectric materials and biomedical enqineerina
- Internal waves and boundary layers in a density-stratified fluid
- Direct energy transform to cross-waves in a rectangular channel of finite dimensions
- Airflow separation over surface gravity waves
- Large-scale flow structures and their role in mass transfer rate enhancement behind an orifice
- Intermittent flow in stirred yield stress fluids slows down chaotic mixing
- Topological chaos and mixing in fluids stirred by almost-cyclic sets
- Modeling carbon nanotube as a real-time mass sensor in viscous fluid
- Small-size and surface effects on the axially buckling of carbon nanotubes
- Nonlocal vibration of nanoplate on viscoeiastic foundation
- Fluid-structure-contact-interaction between liquid droplets and rough surfaces
- Simulation of divergence and flutter instabilities of elastic plate in subsonic and supersonic gas flow
- Control of flow separation on a swept wing at low Reynolds numbers
- Lithium-assisted plastic deformation of silicon electrodes in lithium-ion batteries
- Plane nonstationary contact problems of the impact of rigid and deformable strikers on an elastic half-space
- Some analytical models of frictional heating during braking
- Extended JKR theory on adhesive contact between layered elastic spheres
- A second-order cone complementarity approach for numerical solution of 3D elastoplastic contact problems with orthotropic friction law
- Numerical simulation on painleve paradox during frictional impact of a flexible bar
- Torsion of elastic transversely isotropic half-space with inhomogeneous coating
- Effect of grain shape on micromechanical behavior of sheared granular layers
- Structure of granular packings
- Steady channels and avalanches of dense granular flow down a slope
- Crossover in dynamics of granular packings under cyclic shear
- Simulation of non-breaking and breaking solitary wave run-up and impact by SPH method
- Modeling sticking,stick-slip and sliding in multi-body systems with many frictional contacts
- Coupled multibody system dynamics and its application on self-propelled artillery system
- Experimental investigation on unsteady aerodynamic behaviors of a variable camber airfoil
- Study on dynamic hysteresis and linear modeling of the sliding-skin variable-sweep morphing wing aerodynamics
- Fully developed Rayleigh-Bénard and Taylor-Couette turbulence
- General mechanism for the meandering instability of rivulets of Newtonian fluids
- Efficient coefficient of restitution and Lattice-Boltzmann simulation of gravitational settling and rebound in a viscous fluid
- Simulations of aerodynamics and interracial instabilities of droplets exposed to high-speed gas flows
- Jet formation from bubble collapse at a free surface
- The rebound of a bubble with a solid surface:surface waves as an additional dissipation mechanism
- Influence of parameters in electrohydrodynamic interfacial instabilities for microfluidic applications
- Localization in transitional shear flows
- The Faraday instability in deformable domains
- Renewable energy from flow-induced vibration
- Vortices stability and inverse cascades in a 3D turbulent von Krmn flow
- Chemically-driven miscible viscous fingering:How can a reaction destabilize typically stable fluid displacements?
- Composite toughening by layering
- Weight function for an elliptical crack in piezoelectric media
- Effect of microstructure and loading condition on veryhigh-cycle fatigue life of high-strength steels
- Dynamic analysis of interface cracks in layered piezoelectric materials with non-linear crack-face boundary conditions under impact loading
- Experimental and computational investigation of debonding at the interface of two L-shaped PMMA beams
- Effect and compensation of time delay on semiactively controlled cable
- Modeling of inelastic microstructure development and inhomogeneous material behaviour via non-convex ratedependent gradient plasticity
- Modeling size-effects in single crystals at finite strains:indentation of fcc crystals
- Scaling of the locally averaged thermal dissipation rate in turbulent Rayieigh-Bénard convection
- Theory and experiments of dielectric elastomers
- Thermomechanical coupling and transformation-induced stress-relaxation effects in TiNi shape memory alloy
- Experiments and modeling of magnetorheologicai elastomers with particle-chain microstructures
- High-frequency resonant characteristics of triple-layered piezoceramic bimorphs
- Extended Kantorovich method for three-dimensional piezoelasticity solution of piezoelectric plates
- A theoretical model of a thermal-sensitive gel particle with core-shell structure
- On variational dimension-reduction methods to derive shell theories
- Band-gap of eigenfrequency due to nonlocatity in elastic string
- Stable trivial configuration of elastic systems after bifurcation
- Dislocations and inclusions in prestressed elastic materials
- A separate quasi-particle multiscale method
- A carving technique with the aid of polyhedral elements and smoothed integration for complex structures
- Multiresolution simulations using remeshed particles
- A new constitutive formulation in finite thermoviscoelasticity
- Steady state crack propagation in layered material systerns displaying visco-plastic behaviour
- Issues related to topology optimization of snap-through problems
- Rectification of classical misconceptions in recent solutions of exact structural topology optimization problems
- Experimental study on particle distribution in lockexchange gravity currents
- Numerical study of period-tripling state in Faraday waves
- Simulation-based study of wave-turbulence interaction
- Buckling and cusp formation in gel swelling and tissue growth
- Surface wave patterns:Faraday waves and cross-waves
- Coherent structures in turbulence:A dynamical-systems perspective
- Fluid transport induced by a flexible oscillating flapper in creeping flow
- Damage propagation of composite material reinforced by randomly-dispersed particles
- Defects in crystalline solids:manifestation of quantum mechanics at continuum scales
- Numerical study the thickness of the film that is formed between the free surface of a bubble and the cylindrical walls around the injection orifice
- Simulation and optimization of thin corrugated membranes
- Waves in microstructured solids:dispersion and thermal effects
- Complicated stress oscillations induced in functionally graded material films
- A phase field study on the domain patterns and hysteresis loops of free-standing ferroelectric nano-thin films
- Stability of a condensing liquid film of a binary vapor mixture
- Linear stability analysis of thin liquid film containing soluble surfactant heated uniformaly
- Spectral analysis of wavy structure of thin liquid films under strong gas shear
- Natural mode analysis of elliptical cylindrical cavities with multiple elliptical cylinders by using the collocation multipole method
- Acoustic imagine method of flow-induced fan noise from aircraft engine
- Band structures of phononic crystals with weakly bonded interfaces
- Teaching chaos for freshmen as a liberal education course
- Computing bifurcations of dissipative systems via POD-based ROMs
- Chaotic thresholds for the recently proposed rotating pendulum system
- Mechanics of ion-bombardment induced instability of semiconductor surfaces
- Mechanical behavior of graphene using atomic-scale finite element method and molecular dynamics
- Thermal conductivity of defective graphene nanoribbons—a molecular dynamics study
- Mechanically and thermally tunable properties of graphene materials
- Angular dependence of peeling a carbon nanotube from silicon substrate:steered molecular dynamics simulation and theoretical analysis
- Mechanism of wrinkle formation in chemical vapor deposited graphene and tuning its morphology by substrates
- Nanoscale domain switchings of Bi_(3.15)Dy_(0.85)Ti_3O_(12) thin film at the simultaneous application of polarizing voltage and loading force
- Understanding friction and wear at the nanoscale
- A Fourier-related multi-scale analysis on membrane wrinkling:theoretical study and numerical applications
- Deterministically ordered surface wrinkling micropatterns of thin polymeric films on soft substrate
- Nearly frictionless transport of amorphous matter in nanopores
- The threshold stress of 90° domain switching in misfit strain-external stress phase diagram
- Thermodynamic and micromechanical-based modelling of martensite variants reorientation in FSMAs
- Atomistic potential for martensitic transformations in CuAINi
- Hands-on research schools on nonlinear dynamics
- Step instabilities during thin-film epitaxial growth
- Stretch-induced wrinkling of hyperelastic thin sheets
- Wrinkling of stretched elastic films via global parametric bifurcation
- Three-dimensional transient numerical simulation of gaussian laser beam drilling process
- Multifissuration and debonding of thin films—analytic and numeric 1D solutions via a variational approach
- Trailing-edge noise reduction via spanwise oscillation
- Wave propagation in one-dimensional nanoscale phononic crystals
- Variation of acoustic streaming flow field due to a bounding wall
- Ultrasound as a probe of dislocation density in aluminum
- Measurements of thermal effects on acoustic screech in a choked circular jet emanating from a sharp-edged orifice
- Magnetic field driven microdevices
- Lattice Boltzmann simulation of induced flow by means of low-temperature plasma
- Rotation of non-spherical particles in square chambers using ultrasonic standing waves
- Ultrasonic collection of particles at an air/liquid interface
- Towards understanding of geometrical structure in microstructured optical fibres
- High-speed X-ray imaging of a ball impacting on sand
- Surface stability of an encapsulated bubble in an ultrasound field
- Effect of wall on the lifetime of nanobubbles
- Experiments in diffusive gas-bubble growth
- Destruction of thin films with a damaged substrate as a result of waves localization
- Membranes in the 3D cellular solid model provide the micro-/macro scaling for the long-wavelength acoustics of real foam samples
- Wave propagation in piezoelectric cylinders with surface effect
- Attenuation of sound wave radiated by spinning acoustic dipoles in a circular duct with an inserted impedance surface
- Magnetoelectric coupling of muitiferroic Pb(Zr_(0.52)Ti_(0.48))O_3-CoFe_2O_4 composite thin film with sandwich structure
- Mixed-mode mechanical strength and failure of Ni/Al_2O_3 interface from first-principles
- Determination of the engineer constants of piezoelectric thin film based on the piezoelectric constitution
- SH wave propagation in one piezoelectric laminate
- Electro-mechanical-magnetic coupling in multiferroic heterostructures:phase-field modeling and device applications
- Frictional characteristics of graphene and its derivatives
- Piezoelectric and electrostrictive displacements of(1-x) Na_(0.5)Bi_(0.5)TiO_(3-x)K_(0.5)Bi_(0.5)TiO_3 thin films under the bipolar driving filed
- Molecular simulations of the formation of gold-moleculegold junctions in moletronics device
- Numerical modeling of laser-induced picoseconds ultrasound in micro-nano thin films
- Dispersion relation estimation for the guided wave using time-freuqency representation based method
- A periodic FMM and Calderon's preconditioning for acoustic-elastodynamic coupled problems
- Topological design of acoustic microstructure
- Topology optimization based method for coil arrangement for homogeneous magnetic field
- Diffusive effects on acoustic wave propagation in a gasfilled channel subject to temperature gradient
- Twisted plateau borders and the collapse of a Mbius strip soap film
- Numerical modeling of laser generation of ultrasound by coupled thermoelasticity
- Diffsion wave and signal transduction in biological cell
- Laboratory studies of ocean mixing by microorganisms
- Substrate stiffness dependent cell migration behaviors
- Cell entry of one-dimensional nanomaterials
- Probing mechanical principles of cell-matrix focal adhesion:A coupled stochastic-elastic framework
- A Langevin dynamics approach for analyzing the mechanical response of bio-polymers
- Frequency analysis of knot mass particles in oscillatory spherical net model of mouse zona pellucida
- Molecular model of skeletal muscle contraction
- Micromechanics governing the undulation patterns of inter-cellular boundaries of plant epidermis cells
- Mechanical regulation of receptor-ligand binding by controllable transport
- Binding biomechanics of recombinant human beta 2 integrin
- Mechanochemical model of dynamic microtubule growth
- Biphasic fiber-reinforced modeling of cartilage with sample-specific distributed collagen fiber orientations
- Pairwise interactions between squirming micro-organisms
- Chemobioconvection in a suspension of luminescent bacteria
- A numerical study of swimming micro-organisms inside a capillary tube
- Boundary element analysis of propulsive force and torque of a dinof lagellate symbiodinium
- Multiscale modeling of pseudomonas aeruginosa swarming
- Modeling the beating of ATP-powered natural flagella
- Synchronization of eukaryotic flagella
- Flow-plant interactions,ecology and biomimetics
- Active biological fluids
- Acoustophoresis in lifescience applications
- Effect of charge on mechanical properties of elastomeric proteins
- Reorientation of a non-spherical micro-capsule in shear flow
- Probability of contact of a self-propelled marine larva with a protruding collector
- Mechanical aspects of cell division
- Effect of chemical signaling on the swimming behavior of Vibrio fischeri
- The dynamics of insect flight and maple seeds
- Vorticity production over an accelerating rotating wing
- Aerodynamics of hovering flight in bat
- Unsteady swimming of small organisms
- Fabrication of complex smart microstructures by capillary forming of nanoscale filaments
- Growth and mechanical responses of the arterial wall
- Elastic and geometrical effects in the evolution of living materials:a configurational analysis of growth and mass transport
- Mode switching and synchronization in Chlamydomonas flagella
- Spanwise stretching and collapse motions stabilize leading-edge vortex in slow-flying bats
- Settling induced formation of membrane tube on a vesicle
- Flowfield prediction of a probe entering the Martian atmosphere
- Ring-pattern formation in the rotating stellar structures
- Secular motions of spin-down tops and planets
- Experimental investigation of sand velocity on barchans in windblown sand transport in the wind tunnel
- Effect of monthly climatic variability on characteristic of atmospheric surface layer—a study in Qatar
- Analysis of the Bolgiano length scale the bulk of turbulent Rayleigh-Bénard convection
- Torsional oscillation of the large-scale circulation in turbulent thermal convection with varying Prantdl number
- Entrainment and intermittency in the response of a quasigeostrophic oceanic double gyre to seasonal external forcing
- Multi-scale simulations and analysis on windblown sand movenments
- Influences of modest rotation on the large-scale circulation in turbulent Rayleigh-Bénard convection
- Boundary layer visualization in turbulent Rayleigh-Bénard convection in air
- Sound generation in the interaction of two isentropic vortices
- Complexity of direct numerical simulations of turbulent natural convection
- Mean shear effects at the cloud-top boundary
- Thermogradient model of formation of oil and gas traps at salt diapirism
- Lagrangian measurements in turbulent thermal convection
- Long-term variations and abrupt changes in a strong eastward jet in a double-gyre ocean forced by seasonally varying wind stress
- Dynamics of marine ice sheets
- On damage-tolerant properties test and predictions of titanium alloys used in the pressure hull of manned submersibles
- Tsunami run-up problems treated by modern software Geoclaw:the Tohoku-Oki event as an example
- Storm surges
- On the modelling of tsunami generation and tsunami inundation
- Parametric instability of slender beams with unilateral winkler support:an application to riser dynamics
- A discrete vortex strip method for vortex induced vibration analysis
- Nonlinear long waves over a muddy beach
- Laboratory simulation of the influence of geothermal heating on the global oceanic circulation
- Can energetics really constrain the oceanic stirring by wind and tides?
- Equilibrium dynamics and statistics of gravity-capillary waves
- Long wave generation above a cylindrical sill
- Internal seiches of large amplitude in the elongated lakes and phenomenon of "loch ness monster"
- Modelling of vortex induced vibrations of slender marine structures
- Scenarios of local tsunamis in chnia seas
- Verification and validation of SEC-HY21 model for tsunami inundation
- Predicting sudden changes in pollutant plumes using LCSCORE analysis
- A new mechanism for deep mixing:Internal waves emitted by the eddying circulation in the deep ocean
- A comparative study of dynamic rock tensile strengths obtained from different measurement methods
- Temporal and spatial organisation of faulting in frictional wedges
- Measurement of damage localisation in rocks using ultrasonic velocity measurements/tomography
- Two-dimensional finite-difference modelling of seismoelectric logs
- Mechanic explanation to variation of fault dips under normal fault regime at shallow levels
- The influence of the stresses on the flow rate of wells and their stability
- Dependence of the phase transformation state on fabric anisotropy in undrained behaviour of granular soil
- Unified peak shear strength behavior of interface shear test and direct shear test—new insights from DEM simulations
- Two- and three-dimensional thermo-mechanical modeling of Cenozoic lithospheric deformation in the Himalaya-Tibet-Pamir-Tien Shan orogen
- Drained and undrained plane strain compression of porous rock
- Large scale fluid and solid properties in the taupo volcanic zone,New Zealand
- Mesh generation of geological body with crack extension
- Lessons from Sichuan earthquake:failure and structural integrity
- Ductility reduction factor for MDOF system with vertical irregularities subjected to strong earthquake action
- A numerical study of structural evolution inside the shear band in quasi-static simple shear tests
- The competition between grain melting and solidification during shear heating in simulated faults
- A nonlinear homogenizationmodel for a clayey rock having a plastic porous matrix
- Experimental and numerical study on rock fall impact on a flexible rock-shed structure
- Muliphysics modelling of flowslides initiation
- Simulation of the seismo-electromagnetic field during an earthquake
- On the thickness of the scalar superlayer and its contributions to the mixture fraction PDF in a jet flow
- Models of diamond and graphene based on moment and multybody interactions
- Matching boundary conditions for lattice dynamics
- Microstructure evolution of adiabatic shear band in ultrafine-grained iron under dynamic shear loading
- Understanding mechanoresponsive polymers via microstructurally-based models
- Mechanical behaviour of amorphous polymers through systematic coarse-grained simulations
- Morphology and stability of free surface films of polymer blends
- Reservoir-scale simulation for salt-deposit dissolution with a diffuse interface model
- Complete bandgaps in three-dimensional holey phononic crystals with resonators
- Band gaps of phononic crystals with smooth contact interfaces
- A flame describing function analysis of combustion instability limit cycles sustained by multiple modes
- Directed motion of carbon nanotube in water driven by non-uniform electric field
- Characterization of chaos in polycrystal/foam microstructures and related issues
- Micropolar theory and its application to nematic liquid crystal
- Electro-acoustic couplings in nematic liquid crystals
- Defects interaction conditions in near-field of grain boundaries
- Mechanics of liquid crystals and quasicrystais
- Steel short fiber reinforced concrete(SFRC) strength and post cracking behaviour appreciation by fibers motion prediction in fresh concrete during casting
- Self-excited self-selected combustion oscillations in a Rijke-Zhao tube
- Large eddy simulation of a combusting droplet
- Thermal and kinetic effects of ozone addition on the combustion of methane/air mixtures
- Lifted flames of n-heptane in coflow jets with initial temperature variation
- Studies on the laminar flame speed of binary fuel blends
- Quantifying the dynamic properties of metallic thin-walled hollow sphere foams
- Landau-Levich flow visualization:revealing the flow topology responsible for the film thickening phenomena
- Electro-elasto-capillarity:electric field driven unwrapping of water drop with elastic film
- Failure of solid oxide fuel cells by electrochemically generated internal pressure
- Breath figure of water and oil and the structure pattern formation
- Free vibration of the water-filled double-walled carbon nanotubes based on a three shell-potential flow model
- Reaction-induced motion:chemical swimming,sailing and surfing
- Pattern formation of granular avalanches simulated by particle method with hydrodynamics interaction
- Numerical modeling of fracture in concrete using fractals theory and comparison with AE based b-value
- Influence of structural parameters on abrasion in multiphase matrix-cement materials
- Dilation stability analysis of evaporating liquid-gas interface and simulation of primary atomization of evaporating spray
- Delamination between a unidirectional and woven composite
- Combustion initiation by palladium catalysts
- Studies on the ignition of n-decane/toluene binary fuel blends
- A coupled heat transfer analysis with effects of thermal/catalytic cracking of kerosene for regenerative cooled supersonic combustor
- Experiments and modeling of HMX granular explosives subjected to drop-weight impact
- Diesel/methanol dual fuels combustion-a mode controlled by both chemical kinetic and physical process
- The approximated analytical solutions of axisymmetric contact problems for the coatings of complicated structure
- A new triple porosity seepage model in coalbed
- Mechanisms for geological carbon sequestration
- Control of torsional vibrations in drill-strings via decomposition of traveling waves
- The resonant phenomena in the elastic oil pipeline,spent to sea water and subjected to impulse stressing
- Resonance enhanced drilling
- Mesomechanical model of reticulate CNT/polymer composites to bridge atom and continuum scales
- Modeling failure mechanisms of 3D orthogonal interlock hybrid textile composites in flexure
- Interface fracture energies of individual carbon nanofibers
- Radial deformability of carbon and boron nitride nanotubes
- Buckling instability of carbon nanoscrolls and its potential applications
- Nonlinear mechanical behaviour in curved graphene sheets
- Self-assembly and mechanics interplay in cyclic peptide nanotubes
- Gradient based optimization of periodic layered material with specific band-gap characteristics
- Fundamental study of light-weight composite honeycomb sandwich panels as applied on radiators for space solar power system application
- Periodic oscillations and stability of thin variable stiffness composite laminated plates
- Dynamic response analysis of plane composite trusses with the method of reverberation ray matrix
- Minimum weight design of close-celled metallic foam protection for low velocity impact
- A hyperelastic model of particle-reinforced neo-Hookean composite
- Electroactive polymer composites—mechanical response,stability,wave propagation and band-gaps
- A 2D constitutive model with anisotropy for granular materials
- Transmission loss of orthogonally rib-stiffened composite plates
- Optimization of magnetoelectric effect in multiferroic composites
- Mechanics of nanowire/nanotube in-surface buckling on elastomeric substrates
- Analysis of free vibrations of carbon nanocones using continuum mechanics and molecular dynamic simulations
- Twin-spacing dependent yield strength in the materials with hierarchical nanostructures
- Effect of crack orientation and connectivity on effective permeability of microcracked solids
- Mixed-mode cyclic fatigue delamination growth with large scale bridging in composites
- Size-dependent and tunable elastic properties of hierarchical honeycombs and open-celled foams
- Probabilistic homogenization of solid foams with application to sandwich structures
- A proposed indentation scheme for investigating elastoviscoplastic behaviour of materials at elevated temperatures
- Analysis of indentation size effects under strain gradient viscoplasticity
- Buckling-induced chirality in cellular structures
- A model of nanoscale friction between a carbon nanotube and a substrate
- On viscoelastic properties of three-dimensionally braided composites
- Phase transformation and domain morphology of strain engineered BiFeO_3 by scanning probe microscopy
- Forced vibrations analysis and thermal fatigue life prediction for inelastic layered structures
- Correction of shear creep compliance determined by conical indentation
- Effects of nano-hydroxyapatite and carbon nanotubes hybrid ratio on Ni-Co biological coating's mechanical properties and biocompatibility
- Rayleigh-Bénard convection in liquids with temperaturedependent material properties
- A nano-cheese-cutter to measure interfacial adhesion of freestanding nano-fibers
- On the intra/interlaminar coupling of laminated composites:modeling,identification and validation
- Wave propagation in multilayered structures composed of carbon nanotubes and rigid inter-layers under small velocity impacts
- Buckling and crushing of expanded honeycomb
- Multi-material topology design of laminates with strength criteria
- Composite optimization-ply drop-rate constraints for concept and detailed design
- Free material design with multiple load cases
- Particle swarm optimization in identification of stochastic multiscale models
- Thickness optimization of fiber reinforced laminated composites using the discrete material optimization method
- Atomistic mechanical testing of nanostructures—seeing the invisible and bridging theory and experiments
- Self-healing of GaAs nanowires:an atomistic study
- Multiscale modeling of multi-physics
- Nanostructured networks:materials and applications
- Twin boundary:strengthening or softening?
- Atomistic investigation of enhanced tensile ductility of metallic glass matrix composite with crystalline second phase
- Microstructure-dependent mechanical behaviors of SiC nanowires
- A new elastic-plastic model for describing the nanoinden-tation size effects of surface-nanocrystalline materials
- The analytic study of elastic metamaterials with negative mass and modulus
- Influence of mean flow on transmission loss of sandwich structure with porous material core
- Nature-inspired microfluidic propulsion using magne-tically-driven artificial cilia
- Experimental determination of time-dependent mechanical properties of soft materials
- Effect of stress-state and spacing on voids in a shear-field
- Variable stiffness behavior investigation of filament wound tubes
- Nanomechanics of graphenes and nano-crystals
- Nano-mechanics foundations and experimental methodologies for multiphysics prognosis of functional behavior in heterogenous functional materials(HeteroFoaMs)
- A two-scale approach for the transition from homogenization to localization in multi-phase materials
- Theory and experiment on nonlinear trends of composite laminated plate
- Generation of Leaky Lamb waves by a piezoelectric wafer active sensor in a fluid-loaded anisotropic plate
- Size effects of materials surface roughness for wetting and transportation:from nature to experiments and models
- EEffect of vacancies on the ultimate tensile strain of ZnO nanowires
- Mechanical properties of irradiated metal nanowires
- Basal friction of a dry and a saturated granular mass in unsteady avalanche via high-speed imaging and control volume analysis
- A computational study on overall mechanical behavior of nanocrystalline and ultra-fine polycrystalline metals
- Molecular mechanics study on size-dependent electromechanical properties of boron nitride nanotubes
- Mechanics of damping and energy dissipation in low-dimensional graphitic nanostructures
- Molecular dynamics based study on ductility enhancement effect and temperature dependence of nanocrystalline metals with nanoscale void
- Wave motion and resonances in damaged periodically layered composites
- Models for actuation,failure and tearing of electroactive materials(invited)
- Mechanical-electric-magnetic coupling effects in functional nanomaterials
- Designing microstructures for desired functional materials and local fields
- Size and temperature effect on BaTiO_3 nanocrystallines and potential applications in energy storage
- Structure and rheology of self-assembled micelle-nanoparticle plasmonic nanogels:Experiments and molecular dynamics simulations
- Description of permeability anisotropy of granular materials with anisotropic porosity distribution
- Mechanics of high strain rate behavior of elastomeric random copolymers
- Physical mechanisms of magnetostrictive or electrostrictive interfacial fracture in a bi-layered multiferroic composite
- The relation between spatial and temporal effectsof deformation and fracture of quasi-brittle materials
- Thermal shock analysis of a functionally graded plate using interaction energy integral method
- Microstructure-based evaluation of material fracture toughness
- Modelling of anisotropic composites by newly developed HFS-FEM
- Bounds on the effective elastic moduli of three-phase composites with coated spherical inclusions
- Local buckling of sandwich materials with non-orthogonal plain woven composite facesheets
- Investgation on transient heat transfer of 3D braided composites
- Tuning electromagnetic properties of metamaterials by mechanical deformation
- Modeling of composites with different physical and geometrical connectivities by effective modules and finite element methods
- Anomalous flexural behaviors of microtubules
- A multiple-patch model of microtubules
- Coarse-grained modeling of receptor-mediated endocytosis of nanoparticles
- Image based stochastic multiscale analysis of metal foam
- Material characterization of polycrystals through hyperspace
- Nanoscale vortices in transport of salty solution through a graphene nanopore
- A pathway of hardness enhancement in transition-metal borides
- A model for the energy harvesting performance of shear mode piezoelectric cantilever
- A micromechanical study on the shear strength in granular materials:the role of particle shape
- Wetting and deformation of arrays of elastic fibers
- Probing mechanical principles of cell-nanomaterial interactions
- Dynamical effects in the problem of film delamination
- Size matters:size-dependent mechanical properties of metallic systems
- Approaches to remove size effect due to indenter roundness in nano-indentation
- On the size-dependent mechanical properties of five-fold twined fcc Fe nanowires
- Discrete element modelling of elastic modulus of a granular porous mixture
- Singular phenomenon of integrated size and topology optimization of frame structures with exact frequency constraints
- Recent progress in multi-functional soft smart materials and their applications
- Impulse-based simulation of particle flow during subsurface block-cave mining
- Instantaneous coal outbursts:mechanism and prediction
- On equilibrium domains in superelastic NiTi tubes—helix versus cylinder
- Stability of the state-dependent delay model of turning with depth of cut variation
- Experimental identification of bi-stable parameter zones in milling processes
- A simple nonlinear cutting model for the quick qualitative description of chip formation
- Fluid flow and its driving forces in laser dissimilar welding of stainless steel and nickel
- Interfacial energy effects in evolving martensitic microstructures
- Stress corrosion cracking investigation in Zircaloy-4 using digital image correlation
- An experimental and theoretical study of size effects in the torsion of micro-sized metallic wires
- Metal magnetic memory NDT method:experimental,theory and numerical simulation
- Visualization study on the impingement of liquid droplets on a hot surface
- Instabilities and encapsulation in a gas-cored compound liquid jet
- Temperature oscillation under cyclic phase transition of NiTi shape memory alloy
- The route to simultaneous high stregnth and high ductility metals through engineered nanocrystalline interlayers
- Effects of variable bearing stiffness on the stability of milling processes
- In-situ investigations of small strain plasticity in dualphase steel
- Hydrogen embrittlement in high strength steels
- Thermo-mechanical responces of metals on the fasttransient process in small volumes
- Direct numerical simulation of wet-CO combustion
- Fuel droplet combustion in the presence of acoustic excitation
- Orbital motion of a long flexible cylinder subject to vortexinduced vibrations
- Release of pollutants from particles and pore water due to sediment resuspension
- Multi-scale mechanics and evolving discontinuities:computational issues
- An experimental study on upward air-water flow in a vertical pipe using local measurement techniques:an experimental database
- Parallel simulation and multi-mode evolution genetic algorithm optimization for crashworthiness of thin-walled tube with folding patterns
- Rotating eigenmodes on an imperfect circular plate
- Thin film Nitinol covered stent for brain aneurysms
- Design for maximum band-gaps in beam structures
- Multi-scale design and optimization considering load uncertainties
- On transformation methods for the design of metamaterials
- Analogy study of engineering mechanics
- Use of team assignments in engineering mechanics to educate large cohorts of undergraduate students
- Three-dimensional shape reconstruction of micro-varying liquid surface
- Advances in nonlinear model reduction and parametric modelling using the proper generalized decomposition
- An accurate computation model for magnetic-mechanical based penta-stable mechanism
- Stamping and wrinkling of elastic plates
- Mechanics vs.morphogenesis
- Wrinkling mode evolution in hyperelastic film/substrate bilayers
- An anisotropic discrete fiber model based on a generalized strain invariant with application to soft biological tissues
- The structure and mechanical property of turtle shell
- The concept of holding the international engineering mechanics contest
- Topology optimization of hyperelastic bodies by maximizing the equilibrium potential energy
- Surrogate-based optimum design for non-uniform grid-stiffened shells with adaptive sampling
- Noise radiation of periodical sandwich structures
- Acoustic metamaterials for imaging beyond the diffraction limit
- Theoretical model and finite element simulation of the effective electromechancial properties of cellular piezoelectret film
- Unstable behavior of subsonic round and plane jets in a transverse acoustic field
- Mechanical and thermal performances of CNT micro-pinfin cooler with air jet impingement
- Large bubble rupture sparks fast liquid jet
- Effect of liquid precursors on powder vaporization in an RF plasma spray
- Experimental study on nonlinear phenomenon of liquid sloshing in a circular cylindrical tank with spherical bottom
- Wave patterns on fluid interface subjected to the horizontal vibrations
- Dynamic testing and analysis of self-supporting inflatable beams
- Thickness-shear vibrations of rectangular plates with free edges by the extended kantorovich method
- Nonconforming isogeometric analysis using TC++ splines
- Unique and stable parameters of human motion used for the identification of individuals
- Collapse mechanisms of a blast-resistant uhmwpe composite beam
- Synthesis and formation mechanism of carbon-encapsulated copper nanoparticles in detonation process
- Mechanical properties of cellular structures with rigid square rotations
- Three dimensional analytical solution for brazilian test
- Interpretation of a fracture phase field model using discrete configurational forces
- Minimization of structure-borne noise in lightweight buildings
- Inertia driven reduced doe mechanism for aeolian pumps
- Electro-mechanical dyanamic simulation of overhead creans during the operation of lifting mechanism
- Experiments on a new conductive structure for electrodynamic bearings
- New methodology for lightening parts made from additive manufacturing technologies
- Global dynamics and complexity:a modern perspective for the analysis,design and control of mechanical/structural systems
- Distortion measurement of large crane arms in loading test based on series-parallel cameras net videometrics
- Experimental and numerical study on load sharing behavior of gear system actuated by multiple pinions simultaneously
- Theories of optimal rotor
- A non-smooth model of gear vibration
- Noise aided control of rotor-stator system dynamics
- Mobility analysis of human gait as underactuated mechanical system
- Effects of magnetic lubricant in a rotor-bearing system
- Roller chain drives multibody models using a generalized revolute clearance joint formulation
- Nonlinear spatio-temporal dynamics and stability of the scan process in non-contact atomic force microscopy
- Performance of liquid turbine flometer under low flow rate condition
- Damage detection using proper orthogonal decomposition
- Weakly nonlinear modulated Tollmien-Schlichting waves
- Model update of large complex spacecraft with modal data
- About control possibility of a satellite attitude
- Numerical studies on combustion enhancement by ablative strut in a scramjet combustor
- Aerothermal optimization of hypersonic vehicle leading edge based on genetic algorithm
- Coupling effects of radiation heating and acoustic field of thermal-acoustic test facility for hypersonic vehicle structures
- Morphing structures for improved aircraft performance
- Numerical simulation shock wave buffet on an OAT15A airfoil by IDDES hybrid methods
- Realization and aeroelastic characteristics of a variable planform morphing wing
- Active flutter suppression for high-dimensional aeroelastic system via delayed control
- Design of piezoelectric hydraulic pump based on MEMS valve
- Structural optimization by using different level models
- FENSAP-ICE:Numerical simulation of rotor blade icing
- Three-dimensional modeling of in-flight ice break-up
- The studies of flow mechanism and suppression of wing rock motion
- Large displacement SMA electro-morphing plate for wind tunnel experiments
- Flutter supression via delayed feedback control
- Low-order modeling of biologically-inspired flight mechanics
- Novel morphing skin structures based on smart materials and structures
- Design of morphing sma aerostructures by computational modeling
- Mechanical characterization of foils with compression in their planes
- Multifunctional nano-tailored composites for in situ self-health monitoring of aircraft structures
- Nonlinear dynamics of a drill bit under percussive activation
- Effects of inertance in railway vehicles with active control
- Rail vehicle response to carbody excitations imitating crosswind
- Railway vehicle vibration dynamics and optimized bogie damping to enhance safety and comfort
- A novel anti-collision facility of Wanzhou Yangtze River highway bridge
- Transient responses of girder bridges with poundings under near-fault vertical earthquakes
- Code development for numerical simulation on magnetohydrodynamic rectangular duct flows
- Model experiments of a novel anti-collision facility for Wanzhou Yangtze River Road Bridge
- Vortex-induced vibrations of pipes conveying fluid in subcritical and supercritical regimes
- Aerodynamic control of long-span suspension bridges
- On reducing scouring by controlling junction flow
- Rollover and lateral sliding stability of three wheeled vehicles
- Three-dimensional simulation of a red blood cell in shear flow
- Influence of liquid sloshing on road tanker dynamics and loading
- Dynamic analysis of multi-body vehicle fitted with controlled limited-slip differential using MSC.ADAMS/Car
- A tristable mechanism using combination of magnetic mechanisms and compliant beams
- Robust design of an all-wheel steering car
- A new algorithm for collision force between two cable-connected ships
- Mathematical modeling of the admixture transport in freesurfaced streams
- Failure analysis of concrete gravity dam based on interface element method of discontinuous mechanics
- The role of water on the pressure dip in sand piles
- Observation of localized deformation in partially saturated sand by microfocus X-ray CT and DIC image analysis
- Topology optimization procedures for reinforced concrete design
- 2011 Tohoku(Japan) earthquake and its impact on design of super high-rise buildings
- Research on the wind damage of wind vulnerable structures considering local wind field
- Effects of burning surface moving back on steady-state combustion of high-metal water ramjet engines
- High Rayleigh number convection in a long vertical tube
- On the size of convection cells in an internally heated fluid layer at low Rayleigh numbers
- Boundary-layer circulation in turbulent rotating convection
- Numerical investigation of local Kolmogorov scales in turbulent Rayleigh-Bénard convection
- A Lagrangian take on convective heat transfer
- Theoretical aspects of microchannel acoustophoresis:thermoviscous corrections to the radiation force
- Micro-blowing effect on two coupled wakes behind two square cylinders
- A multi-regime flamelet method for premixed and non-premixed combustion in spray flames
- Modeling of a piloted premixed jet burner using large-eddy simulation
- Experimental investigation of flame characteristics in a lean-direct-injection spray combustor
- Multi-planar stereoscopic PIV measurements in a combustion engine
- Efficient simulation of muitiscale non-continuum transport
- Boundary layer structure in turbulent Rayleigh-Bénard convection
- Borehole heat exchanger modelling:validation and system parameters evaluation
- Dynamics of sheet plumes in turbulent convection
- Onset of three-dimensional thermal convection in an inclined rectangular or cubic cavity
- Effects of material properties on liquid flow and heat transfer in rectangular microchannels
- Model for effect of plumes in turbulent free convection boundary layers
- Stability of a natural convection flow inside a cylindrical cavity partially heated on the side
- Heat transfer in developed compressible convection
- Measurement of the temperature field in a Rayleight-Bénard turbulent convection cell by light induced fluorescence
- DNS of turbulent swirling premixed flame and pressure oscillations in a micro combustor
- Heat transfer and boiling of liquid helium oscillation in narrow rectangular duct
- Velocity space-time correlations in turbulent thermal convection
- Vortex motions in soft and hard 2D turbulent Rayeigh-Benard convection
- Comparison between rough and smooth plates within the same Rayleigh-Bénard cell at high Rayleigh numbers
- Fukushima and Chernobyl nuclear accidents' environmental assessments and U.S.hanford nuclear site's waste management
- High-fidelity simulations of flow transition on a wind turbine blade
- Immersed boundary approach for wind forecasting over complex terrain using GPU clusters
- Three-dimensional simulation of domain switching in ferroelectrics based on a phase field model
- Dynamic electromechanical behavior of piezoelectric ceramics
- The role of solid mechanics in electrochemical energy systems such as lithium-ion batteries and fuel cells
- Topology optimization of a composite cathode in a solid oxide fuel cell
- Surface and size effects of low-dimensional ferroelectrics via multiscale electromechanically coupled computational methods
- Wind turbine load performance using iterative learning control
- Study on the pantograph characteristics affecting the overhead contact system for high speed trains
- Wind turbine wakes,power deficit in clusters and wind farms
- LES modeling of wind turbines:interaction with turbulent flow
- On the potential load reduction on wind turbines by flap control using measurements of local inflow to the blades
- Full scale verification of wind farm production predictions
- Molecular dynamics simulation of deformation behavior of gadolinia doped ceria under tensile loading
- R-curve behavior of ferroelectric materials:a semi-analytical approach.
- An experimental study on the stability of the tip vortices behind a small-scale model turbine
- Sliding dynamics in ZnO piezoelectric nanogenerator
- Mechanical force modulation with permanent magnets at small scale
- On the effect of tsunamis on nearshore wave energy converters
- Instability of high-energy-density insulating polymers
- In situ strain measurement in anodes for lithium-ion batteries
- Multibody model for planetary gearbox of 500 kW wind turbine
- The effects of surfactants and light-winds on spilling breakers
- Measurements and computational simulations of the effects of sand-fixing forest on the wind flow over two underlying surfaces
- Atmospheric coherent structures and biological invasions
- A nonlinear vibration-based magnetoelectric energy harvester
- Emergence of synchrony in cardiac cells through mechanical communication
- Biomechanics of abdominal aortic aneurysms:biaxial experiments and related modeling,tissue dissections and microstructural characterization
- A computational electromechanical model for the myocardium including fiber and sheet disarray
- Viscoelastic properties of vascular endothelial cells exposed to stretch
- Passage of a DDS nano-particle through the cleft of capillary wall with glyco-chains
- Embryogenesis of intestinal tissues:anisotropic growth and secondary bifurcations
- A fluid structure interaction model of porcine aortic valve with phsyologic tissues properties and flow boundary conditions
- Cellular biomechanical systems for studying and diagnosing hematologic diseases
- Probing memory effects in porous media using nuclear magnetic resonance
- Pressure wave propagation in full-body arterial models:a gateway to exploring aging and hypertension
- Numerical analysis of alternate Newtonian-Casson blood flow in coronary artery bypass graft anastomosis
- Modelling the evolution of cerebral aneurysms:biomechanics,mechanobiology and multiscale modelling
- Multiscale modelling of avascular tumour growth under hypoxic microenvironment
- Heat transfer,fluid flow and drug transport in the anterior eye
- Experimental study of drug release system based on electrospun nanofibres
- Lessons for bio-inspired design:fluid dynamics of embryonic heart
- Force-induced internalization of magnetic nanoparticles into living cells
- Modeling the influence of mechanical factors on longitudinal bone growth
- Staggering and hierarchy selected by load-bearing biological materials for maximal toughness
- Modeling calcium wave based on anomalous subdiffusion of calcium sparks in cardiac myocytes
- Axial fatigue of MP35N coils used as conductors in implantable medical devices
- Experimental investigation on mechanical properties of meshed titanium plate structures for reinforcement tricalcium phosphate bone implants
- Floquet stability analysis of hovering model insects
- Effective methods of teaching vectors in university introductory mathematics
- Multiple Hopf bifurcations for a novel smooth and discontinuous oscillator with irrational nonlinearities
- Injection moulding of polymers with micro and nano scale ridge and channel features
- Two parameter codimension-three bifurcations of a novel nonlinear oscillator with strong irrational nonlinearities
- Multiscale atomistics for defects in electronic materials
- Vibration isolation and control of an impact oscillator
- The periodic solution analysis of a smooth and discontinuous(SD) oscillator
- Dynamics of oscillators with continuous and discontinuous nonlinearities by harmonic balancing and path following
- Attributes of hyperbolic attractors in non-smooth mechanical oscillators
- A vibration analysis of quartz crystal resonators with nonlinear mindlin plate theory
- Wetting phenomenon in cavitations of electronic packaging materials
- Synchronization motion of networked harmonic oscillators under local instantaneous interaction
- On the similarity between the electromagnetics of microstrip antenna and the mechanics of composite substrates
- Aspects on the use of wind lidar measurements up to 600 meters for wind energy studies:wind profile,weibull distribution and boundary layer height
- Operation mechanism for tunable hemispherical eyeball cameras
- Toward the multi-scale simulation for a human body using the next-generation supercomputer
- Towards an integrated approach of production systems
- Linear digital image correlation with SOBEL or SCHARR operators
- Quasi-conforming isogeometric analysis for geometrically complicated domains
- The dynamic and robust control of space robot during capture operation
- Size-depdendent models for electrostatically actuated mems
- Nano sensors for strain measurement by micro-Raman spectroscopy
- Dodekapod as universal intelligent structure for adaptive parallel spatial self-moving modular robots
- Novel method for three-dimensional velocity and acceleration detection with FBG arrays
- Vertical angular momentum minimization for biped robots with kinematically redundant joints

Please fill in the following form to complete the subscription information. Please provide your real information and it will be kept strictly confidential. We will contact you according to the information given. All the items are compulsory.

Your subscription has been submitted. We will contact you later.